হোমপেজ/xnx transmitter installation manual
aalan

AddaBuzz.net Latest প্রশ্ন

Jennifer Lorance
Jennifer Loranceনতুন
সময়ঃ 3 বছর আগেক্যাটাগরিঃ

  1. Jennifer Lorance
    সেরা উত্তর
    Jennifer Lorance নতুন

    TITLE How to perform gas calibration on the XNX ? ARTICLE NUMBER 000005193 QUESTION / PROBLEM? How to perform gas calibration on the XNX? ENVIRONMENT XNX Universal Transmitter MPD ANSWER / SOLUTION Access the programming menus. Once in the menus select the Calibrate menu and press (✓) key. Select thবিস্তারিত পড়ুন

    TITLE

    How to perform gas calibration on the XNX ?

    ARTICLE NUMBER

    000005193

    QUESTION / PROBLEM?

    How to perform gas calibration on the XNX?

    ENVIRONMENT

    • XNX Universal Transmitter
    • MPD

    ANSWER / SOLUTION

    1. Access the programming menus.
    2. Once in the menus select the Calibrate menu and press (✓) key.
    3. Select the Gas Calibration menu and press the (✓) key.
    4. Apply zero gas; when the zero gas reading is stable press the (✓) key to confirm zero calibration.
    5. If the zero calibration is successful, the transmitter will display the Zero Passed screen.
    6. Press the (✓) to perform Span Calibration, select the (✖) to skip the Span Calibration and return to the Calibration menu.
    7. Enter the concentration of the span gas by using the (+) or (-) switches to increment or decrement the values. Use (✓) to accept the value and move to the next digit. Continue until all digits have been selected.
    8. Apply span calibration gas; when the span reading is stable tap (✓) to confirm span calibration.
    9. If the span calibration is successful, the transmitter will display the Span Passed screen.
    10. When completed the user will be prompted to select either to “Exit with Inhibit Off”, “Exit with Inhibit On” or “Do not exit”.

    xnx honeywell data sheet pdf download

    xnx transmitter installation manual pdf download

    সংক্ষেপে দেখুন